Cyberware designs, manufactures, and sells standard and custom 3D scanning systems and software.

Motion Platform Power Supply Problem

1. Verify the operation of the power supply:
   1. Look to see if the power supply light is burning on the face of the power supply near to the AC power cord plug.

   2. Listen for the fan spinning in the power supply.

   3. Attempt to turn on the digitizer lights.

   4. See if the light is burning on the side of the 3030 digitizer head.

   5. If these work correctly, the light bulb is burnt out.

2. If the power supply is not functioning, remove the fuse box, which is located on the power supply, next to the plug for the AC power:
   1. Disconnect the power supply from AC power.

   2. Open the fuse box using a pointed instrument.

   3. Examine the fuse and replace, if necessary. See the fuse schedule for the proper replacement fuse type.