 |
 |
 |
 |
 |
 |
Cyberware designs, manufactures, and sells standard and custom 3D scanning systems and software. |
Fuse Replacement Schedule
If your Cyberware digitizer has blown a fuse, refer to the table below to
select the proper replacement fuse(s). The fuses listed below can
be found at most any electronics or hardware retailer. Also, the Slo Blo
version of each fuse should be used.
| Platform | 120 VAC | 220-240 VAC | 100 VAC |
|---|
| LN | 1.6 Amp | 0.8 Amp | 2.0 Amp |
| MM (SCSI) | 1.6 Amp | 0.8 Amp | 2.0 Amp |
| MS (SCSI) | 1.6 Amp | 0.8 Amp | 2.0 Amp |
| MS (USB) | 5.0 Amp | 5.0 Amp | 5.0 Amp |
| PS (SCSI) | 1.0 Amp | 0.5 Amp | 1.6 Amp |
| PS (USB) | 5.0 Amp | 5.0 Amp | 5.0 Amp |
| Model 15 | 1.0 Amp | 1.0 Amp | 1.0 Amp |
| M7G | 5.0 Amp | 5.0 Amp | 5.0 Amp |
| WB4 (Primary) | 12.0 Amp | 12.0 Amp | |
| WB4 (Heads) | 5.0 Amp | 5.0 Amp | |
| WB4 (Laser) | 1.0 Amp | 1.0 Amp | |
| WB4 (SCSI) | 5.0 Amp | 5.0 Amp | |
| WB4 (Motor) | 3.0 Amp | 3.0 Amp | |
| WB4 (Brake) | 2.0 Amp | 2.0 Amp | |
| HRC | 1.25 Amp | 0.63 Amp | |
