Please note that the system requirements listed below are the minimum requirements needed to operate Cyberware hardware and software. These specifications should be used only as a base to work from. Refer to the Recommended System Specifications (below) for expanded specifications. Also, please refer to the Windows 7 Notes for supported scanner motion platforms.

• Intel or AMD CPU Running At 2.6GHz or Higher
• Windows Operating System:
• Windows VISTA is not supported
• Windows 7 (32- or 64-bit)
• Windows XP Professional With Service Pack 2.0 or Higher (32- or 64-bit)
• Windows 2000 Professional With Service Pack 2.0 or Higher (32-bit)
• Ethernet Network Interface Card and Drivers
• Dedicated, Accelerated 3D-Graphics Card and Drivers:
• Intel Express Chipset Family not supported (965, 963, ...)
• Graphics Card Must Support OpenGL
• Monitor and Graphics Adapter must support a resolution no less than 1600 × 1200
• 1Gb RAM
• 400Mb Free Hard Drive Space
• CD-ROM Drive
• Internet Access During Installation
• Three- (3) Button Mouse
• 1 Free USB 1.0 Port For Each Motion Platform
• A Dongle (USB or Parallel) Is Required If the System Will Be Connected to a Laptop Computer
• Adaptec SCSI Card With ASPI Layer Support (SCSI-Based Scanners ONLY)
• 1 Free SCSI Address For Each Motion Platform (SCSI-Based Scanners ONLY)

Environmental Limits

Cyberware scanners are designed to operate in a typical office environment; 20°C (68°F) to 28°C (82°F), non-condensing. The minimum and maximum temperature ranges are 15.5°C (60°F) to 32°C (90°F), non-condensing. There is a possibility of data degradation at the limits of temperature tolerance.

These specifications describe a PC that is optimally configured to handle the large amount of data generated by a Cyberware scanner. If you wish to upgrade further from these specifications, we recommend that you concentrate on RAM and a higher-level video card. Also, please refer to the Windows 7 Notes for supported scanner motion platforms.

• Pentium CPU Running At 2.8GHz or Higher
• Windows Operating System:
• Windows 7 (32- or 64-bit)
• Windows XP Professional With Service Pack 2.0 or Higher (32- or 64-bit)
• Ethernet Network Interface Card and Drivers
• Dedicated, Accelerated 3D-Graphics Card and Drivers:
• Graphics Card Must Support OpenGL
• Monitor and Graphics Adapter must support a resolution no less than 1600 × 1200
• 512Mb VRAM
• 4Gb RAM
• 600Mb Free Hard Drive Space
• DVD-RW Drive
• Full Internet Access
• Three- (3) Button Mouse
• 1 Free USB 2.0 Port For Each Motion Platform
• A Dongle (USB or Parallel) Is Required If the System Will Be Connected to a Laptop Computer
• Adaptec SCSI Card With ASPI Layer Support (SCSI-Based Scanners ONLY)
• 1 Free SCSI Address For Each Motion Platform (SCSI-Based Scanners ONLY)