The Project Manager allows the user to customize the Measurements and Points in a project. Groups of measurements and points developed for specific users are available for quick selection.

This section of the tutorial will show you how to enter the project information into the Project Manager and set the current project.

1. Select 'Project | Manager...'.

Project Menu

The Project Manager window will now open.

Project Manager

2. Click the New button to create a new project. The project manager will expand to show details about this project.

Project Manager

3. Add information to the Project Manager
1. Project Name:

Enter a name of "Full Tutorial".

2. Project Type:

Choose 'Head and Face' from the pop-up menu.

3. Company:

Enter your company's name here.

4. Location:

Type in your location (building / city / department / etc.).

5. Group Label:

The group should be an identifier that will allow you to differentiate between different scanning subject groups. This label might be a calendar date or a population. For the purposes of this tutorial, use the name "Group".

6. ID Label:

This identifier should be specific to each individual scan subject. One might use a social security number, driver's license or employee number. Enter "ID" as the label for this tutorial.

7. Database Folder:
1. Press the Browse... button.
2. Navigate to the 'C:\ drive by clicking on the c:/ button at the top of the Choose Folder dialog.
3. Double-click the 'digisize_databases' folder.
4. Double-click the 'ps_cyberware_head_db' folder.
5. Click the Okay button to select this folder.
8. Size Tables:

This value should be set to demo.

9. Segmentation:

The segmentation algorithm should be set to NEW.

10. Printer:

If you have a printer connected to your PC, you may select the port that the printer is connected to in this pop-up. If you do not have a printer connected, or you do not wish to print out sizing tickets, select NONE.

11. Scale:

If your scanner is equipped with a weigh scale, select the appropriate port in this pop-up. If no scale is connected, or you do not wish to capture weight measurements, select NONE.

12. Naming Convention:

The naming convention should be set to Standard.

4. Choose the appropriate measurement category. If you have a contract with Cyberware to develop custom measurements, select your measurements using the procedure that follows. If you do not have a contract, continue to the next step:
1. Click the Choose Categories button.

Project Manager

This will open the Project Category Edit window.

Project Category Edit

2. In the Project Category Edit window, click the user button.

Project Category Edit

All of the users will be deselected and the user button will turn to red.

Project Category Edit

3. Choose the appropriate user checkbox (Consult Cyberware Support if you are not sure which selection to make).
4. Click the Add All >> button. This will add all of the measurements from the user selection to the current project's listings.

Project Category Edit

5. Click the Save button.

Project Category Edit

6. Click Yes button when prompted to save these project definitions.

Save Definitions

5. In the Project Manager window, press the 'Save' button to save this project.

Project Manager

6. If prompted, confirm that you would like to use this project as the current project.

Project Manager

7. Close the Project Manager by clicking the Window Close Button at the top right of the window.
8. Continue to the Scan Manager.