Measure Batch

The Measure Batch provides a convenient method for automatically extracting measurements from the current project. It excels in working with large databases with minimal user intervention.

NOTE:
You must complete the Point Batch Tutorial before you proceed with this section.

Using Measure Batch

The software is now ready to extract measurements from the current project.

  1. Select 'Measure | Batch...'.
    2. [Measure Menu]
    Measure Menu

    The Measure Batch window will now appear on your screen.

    [Measure Batch]
    Measure Batch
  2. Press the Select All button. This action will select all of the measurements in the list so that they can be used in the calculations.
    3. [Measure Batch - Select All]
    Measure Batch - Select All
  3. Press the Calculate Measurements button to begin the measurement extraction process.
    4. [Measure Batch - Calculate Measurements]
    Measure Batch - Calculate Measurements

    The DigiSize software will now go through each scan in the current project and automatically extract the measurements.

    When this procedure is complete, you will be presented with a dialog asking to rebuild the measurement statistics.

  4. Press the Yes button to save the newly-acquired measurements into the database.
    5. [Rebuild Measurement Statistics]
    Rebuild Measurement Statistics

    The Measure Statistics - Build window will now appear on your screen.

    [Measure Statistics]
    Measure Statistics
  5. Press the Okay button.
    6. [Measure Statistics]
    Measure Statistics
  6. Close the Measure Batch window.
  7. Proceed to the Database Compress tutorial.