Verify the Installation
  1. Turn on the scanner at the main power supply.
  2. If this is a SCSI-based scanner, turn on the SCSI interface.
  3. Reboot the PC.
  4. Login to the PC. Windows should recognize the new hardware.
    1. Continue to install the drivers for a USB-based scanner.
    2. Continue to install the drivers for a SCSI-based scanner.
  5. Launch the scanning software by double-clicking the DigiSize icon. You should see a window similar to the one below:
    6. [DigiSize]
    DigiSize

    If you do not see a scanner listed in the grey area between the buttons (at the bottom of the DigiSize window), such as "WB (SCSI) #9999" or "PS (SCSI) #9999", select a scanner:

    1. Choose 'Scanner | Select Device...'.
      2. [Select the Device]
      Select the Device
    2. Click on the scanner that you would like to use as the default (even if no scanner exists). For the purposes of this document, we will choose the PS (SCSI) #9999 configuration.
      3. [Choose a Scanner]
      DigiSize Scanner Check
    3. Press the Accept button.
  6. See the Quick Start in this user guide for specific examples of how to use the software or review the DigiSize User Guide.

DigiSize is now ready for use.