Installation Instructions

SCSI Driver Installation
  1. Windows will open the first Found New Hardware Wizard.
    2. [Found New Hardware Wizard]
    Found New Hardware Wizard
  2. Select the option for No, not this time.
  3. Click the Next > button.

    4. You will now see the next wizard window (below).

    [Found New Hardware Wizard]
    Found New Hardware Wizard
  4. Select Install the software automatically (Recommended) button.
  5. Click the Next > button.

    6. You should now see that the operating system is installing the appropriate driver.

    [Found New Hardware Wizard]
    Found New Hardware Wizard
  6. When the Wizard has finished, you will see a windows similar to the one below:
    7. [Found New Hardware Wizard]
    Found New Hardware Wizard
  7. Click on the Finish button.
  8. Repeat this procedure as many times as is necessary (up to 21 iterations). There are, at least, three (3) drivers that must be installed for most scanners; a range camera driver, a texture camera driver and a motion system driver.
  9. Return to the previous page to continue the installation and verification process.