Dongle Installation Instructions

These instructions are for Windows-based scanners and assume a working knowledge of Windows and general workstation setup procedures.

Dongle Installation

The process for installing and activating dongle-enabled Cyberware software is very straight-forward. This document will outline the steps necessary to install the dongle and supporting licensing software.

  1. Use Windows Explorer to navigate to the 'Misc' folder on the software installation CD-ROM.
  2. Double-click the dongle driver installation program, 'HDD-Win-*.exe'. You should see a window similar to the following:
    3. [HASP Welcome Screen]
    HASP Welcome Screen
  3. Click the Next > button.
  4. Review the licensing information, then select the I accept the license agreement button, then click the Install > button.
    5. [License Agreement]
    License Agreement

    The installer will now copy the necessary files to your computer. When the installation is complete, you will be presented with a dialog box similar to the one below:

    [HASP Installation Complete]
    HASP Installatation Complete
  5. Place a Cyberware-provided dongle into the appropriate port (USB or Parallel) on your computer.
  6. Reboot the computer to load the drivers and activate the dongle.
  7. Select 'Start | All Programs | headus | About 3D tools'.

    8. This will open the headus 3D tools Control Panel:

    [headus 3D tools]
    3D tools Control Panel
  8. Make note of the Dongle value, towards the middle of the window. In this example, the Dongle value is "4faa45b6. The value will always be eight (8) characters in length and can be combination of lower case letters and numbers.
  9. Send the HASP value to Cyberware Support for processing and license activation.
  10. After receiving the unlocking key(s) from Cyberware Support, follow any directions that are given to you to activate the licenses.

    11. Typically, Cyberware Support will provide a user with a complete keys file that the user simply copies to the appropriate location in order to activate the licenses.

  11. A sample unlocking key is provided below for your reference:
    12. ce ad d6 de d0 6a d3 89 eo 23 e1 xv v8 87 84 ab 73 # product 4f000001 never 1000

    If you will be entering the unlocking keys manually, Please note that the keys must be typed in exactly the same format as in the example above. Any deviation from the format will result in the license being invalid. Each license key should occupy only one line in the keys file, and there should be no blank lines between multiple unlocking keys.

  12. Verify that each program that was purchased now works and that the license key was accepted by double-clicking on the individual program(s).
  13. Proceed to the final installation instructions.